This premium all-In-one micro sprinkler kit can water up to 535-sq ft of landscapes, gardens, shrubs, trees and more
Includes a mechanical egg timer, so you can manually set it for 15 to 120 minutes and will turn off automatically once the time has elapsed, also has a 50 PSI regulator to help prevent against blowouts of micro sprays, 1/4-in connectors and 1/2-in poly
Includes 100-ft of 1/2-in poly to run through your landscapes and supply water to 10 black stake assemblies and includes 6 of our 1/2-in support stakes to secure the 1/2-in poly to the ground
Each stake assembly is complete with a new 9 to15 GPH flow restrictor, 27-in flexible black vinyl, 13-in black stake, on/off control valve, vinyl locking collar, and a 3-in-1 half circle 4-ft radius micro spray
Kit also has 2 of our micro spray pot stakes, 1/4-in connectors and 10-ft of 1/4-in vinyl so you can run water from the 1/2-in poly tubing to 2 potted plants and includes three 8-in stake extensions to add height to the micro sprays
With the included 7 unique spray patterns, you get the coverage needed and the ability to adjust the spray pattern of each stake assembly with it's adjustable on/off valve, and kit also includes three 8-in stake extensions to add height to the micro spray
Our all-in-one tool makes installation of the 1/4-in connectors easier and comes with a cleaning tool to clean micro sprays and the violet flow controller, kit also includes 4 goof plugs to seal any unused holes in the 1/2-in poly tubing
Includes a 1/2-in coupler to either extend the system or to repair a broken line. It also includes a tee fitting to run the 1/2-in poly in opposing directions and end crimpers to end your 1/2-in poly tubing line
RECOMMENDATIONS & LIMITATIONS
When installing any irrigation system, it is important to be aware of manufacturer recommendations and potential system limitations. Please be aware of the following:
The timer (MLWT-1ZONE, MLWT-TWOZONE, or MLWT-EGG) must always be the first thing attached to the faucet, then the pressure regulator (MLD-25PR or MLA-58), filter (MLFF-41), and then the poly faucet hose fitting (MLF-33)
MAXIMUM RUNS
Run up to 300-ft of our 1/2-in Poly Tubing installing up to 40 of our Micro Spray Stake Assemblies (MLS-211, MLS-BLA, or MLS-TAN) & less than 10 drippers off one faucet. If you want to run more than 10 drippers and have 30 micro spray stake assemblies installed, then you would need to replace each of the 10 GPH micro spray stake assemblies with one of the following choices in drippers: 20 .5GPH drippers (MLD-.5PC), 10 1 GPH drippers (MLD-PC1), or 5 2 GPH drippers (MLD-2PC).
Attach up to 6 of our Micro Spray Kits per single faucet
Minimum operating pressure for Timer: 15 PSI
Maximum operating pressure for Timer: 50 PSI
